Intelligent microprocessor power supplier designed to use LED Power supplied at a Constant Current. iCOLOR CC receives DMX/DALI/PUSH BUTTON control signals on 4 channels (RGBW), and converts them respectively into
Constant Current in output on each channel (RGBW).

The electronic board is created using 3 functional blocks:
• RX
• Intelligence
• DCC

RX block
This is a reception device for DMX/DALI signals that accepts commands coming from the DALI Master Control Unit or Master
DMX control devices.
Intelligence block This is composed of a microprocessor that processes the package of DMX/DALI signals for management of the power supplier and converts them into PWM signals then sent to the CC Driver for regulating the currents in Output. The address of the power supplier can be set through the existing DIP SWITCH switches or through RDM technology.
DCC block
This is composed of 4 devices that supply Constant Current on the basis of the levels dictated by the PWM signals coming from the Microprocessor. The Max Current (350mA) is established according to the type of LED to be supplied.
  • Share on:
Certificates and requirements
Technical drawings
iCOLOR CC
Code input output LED min.-max.
10.101346 24 VDC 350mA 1-6 24VDC
TECHNICAL SPECIFICATIONS

Power supply: 24VDC
Output power: up to 12W for 24VDC channel.
Max No. of controlled LEDs: 24LEDs
(No.8 per channel) 24VDC. - 350mA.

Control inputs:
• DMX/RDM (4ch DMX RGBW)
• DALI
• PUSH BUTTON

Output:
• Direct Current 350mA