Intelligent Microprocessor power supplier designed to use LEDs supplied in Constant Voltage. iCOLOR CV receives DMX/DALI/ PUSH BUTTON control signal on 4 channels (RGBW) and converts them respectively to Constant Voltage in output on each channel (RGBW).
The electronic board is created by 3 functional blocks:
• RX
• Intelligence
• DCV

RX Block
This is a reception device for DMX/DALI signals that accepts commands coming from the DALI Master Control Units or DMX Master Control Devices.
Intelligence block
This is composed of a microprocessor that processes the package of DMX/DALI signals for management of the power supplier and converts them into PWM signals then sent to the CV Drivers for regulating the currents in Output. The address of the power supplier can be set through the existing DIP SWITCHES or through RDM technology.
DCV Block
This is made using 4 devices that supply Constant Voltage on the basis of the levels dictated by the PWM signals coming from the Microprocessor. The Max Voltage (24V) is supplied by an external power supplier and is set according to the characteristics of the LED modules to be supplied.

  • Share on:
Certificates and requirements
Technical drawings
iCOLOR CV
Code input output
10.101349 24 VDC 4 x 2,5A

TECHNICAL SPECIFICATIONS

Power supply: 24VDC
Output driver: max 240W
(60W per channel).

Control Inputs:
• DMX/RDM (4ch DMX RGBW)
• DALI
• PUSH BUTTON

Output:
• Constant Voltage (max 2.5A for 24VDC channel.
• Built-in programs: n.65.